Because of the practical importance of galvanic corrosion arises the need to study the effect of corrosion inhibitors, area ratio of cathode to anode (Ac/A), rotational velocities of specimens on galvanic corrosion of several industrially important metals and also to follow the behavior of corrosion rate.
In this work it is attempted to find a model describes potential,current, and concentration distributions in addition to hydrodynamicstudy along an electrochemical fluidized bed reactor. Electrochemicalfluidized bed reactor consists of a bed of particles which fluidizes andexpands by an upward moving electrolyte. An electrical potentialdifference is applied between the upper and lower parts of the bed which induces the electrochemical reaction to take place on thesurfaces of the particles.
By achieving simulation of hydrodynamics in a bubble column reactor,have taken an important step towards designing an efficient slurry reactor for large-scale conversion of synthesis gas to liquid hydrocarbons. The simulation allows determining gas holdup, a key variable affecting the reaction rate of gasto-liquid (GTL) conversion using Fischer-Tropsch (FT) chemistry.This information is important because there is the potential for the wide application of FT for conversion of refinery residues,an ever-increasing problem on a worldwide basis.
This study deals with minimizing energy requirement in multicomponent non-ideal distillation processes using thermal coupling technique.Two ternary (Methanol-Ethanol-Water and Acetonemethanol-Water) with different feed composition of [(0.333,0.333,0.333), (0.8,0.1,0.1), (0.1,0.8,0.1), (0.1,0.1,0.8)] ,and one quaternary feed systems (n-Hexane MCP Ethanol and Benzene) with different feed composition of
The main objective of this study is to electroplate different plastic types of thermoplastic as (ABS and polystyrene) and thermosetting as (epoxyfiberglass and phenolic) and to study the best graphite conductive colloid from particles size and binding agents to deposit graphite layer onto plastic surface. This process can make copper electroplating possible without intermediate conductive copper film deposited via electroless copper by using direct copper plating There are two reasons for using a copper layer.
This work presents the study of fluid flow through a packed bed, where two fluids were used separately (air and water). The packed bed contains spherical glass particles distributed randomly.The packed bed was 7.62 cm in diameter and 57 cm long. The glass particles were 0.42, 0.50, 0.61, 0.79 and 1.01 cm in diameter. Different flow rates of fluid were used which expressed by modified Reynolds number. The experiments were carried out at laboratory temperatures (32 ◦C) for air flow and at tap water temperature (25 ◦C) for water flow.
This study deals with the recovery of the energy available in hot and cold streams that exchanging heat. This can be done by heat exchanger network, to minimize the cost and the use of utilities. The transfer of energy from the hot stream to the cold stream depends on the rate of flow, area of the exchanger, the heat transfer coefficient and temperature gradient along each stream.
This investigation covers a study of the thermal expansion of basic lubricating oils. The three types of Iraqi base lube oil –Stocks, namely 40 Stock, 60 Stock, 150 Stock and also lubricating oil with additives from Al -Dura refinery. The investigation also covers the effect of additives on the thermal expansion coefficient of a lubricating oil.
Because of the practical importance of analyzing and controlling the systems arises the need to study the frequency response analysis for any system of several industrial plants. The frequency response used for the studies of dynamic characteristics of chemical processes and control loops in the present work. The process control implemented for different control strategies and compare between them by using frequency response techniques.
Because of the practical importance of analyzing and controlling the systems arises the need to study the frequency response analysis for any system of several industrial plants. The frequency response used for the studies of dynamic characteristics of chemical processes and control loops in the present work. The process control implemented for different control strategies and compare between them by using frequency response techniques.
تتويج لجهود منتسبي جامعة النهرين بمختلف مستوياتهم الوظيفية حصلت الجامعة على المرتبة الثالثة عراقياً والمرتبة الثانية والأربعون ضمن أفضل خمسين جامعة عربية لعام 2015 كما ورد في التقرير السنوي الصادر عن شركة QS التي تقوم بتصنيف الجامعات العالمية سنوياً.
